Specification for the Aqua Bell Trojan 33

General description

This outline specification is intended to give details of this 33ft semi displacement workboat.

Aqua Bell Trojan 33 is a boat developed on a well proven seaworthy single chine hull form which has been developed and improved over many successful years of use. Providing operators with cost effective support for a variety of marine activities.

The vessel has been designed and constructed to comply with The Small Commercial Vessel Code of Practice, MCA category 2, up to 60 miles from safe haven. Upon completion the vessel can be certified providing all the relevant MCA papers to a maximum of 12 persons onboard.

Dimensions

Length Overall	33'00"	(10.06m)
Beam	10'06"	(3.20m)
Draught	3'04"	(1.01m)
L.W.L.	28'06"	(8.69m)

Hull

Heavy-duty glass fibre reinforced construction of semi-displacement planing design giving speeds of up to 24 knots, depending on engine installation. All materials employed are of the best quality and carefully selected.

Superstructure

Shortened glass fibre reinforced superstructure including moulded return and bulkhead at the rear giving a cleaner and better finished line to the rear cabin bulkhead.

Construction

Deck beams and all framing in hardwood, sizes to suit application. All plywood in marine grade to BS1088.

Forepeak

Consisting of collision bulkhead positioned forward of vee berths with hinged inspection panel and locker drain overboard when used as anchor chain stowage.

Fore Cabin

Comprising of two full length moulded berths with stowage beneath, these bunk fronts bonded to hull form independent watertight sections. Moulded 'V' berth structure bonded to hull sides with shelf above, all exposed GRP is covered with soft lining material. The cabin has two 12 volt cabin lights installed to headlining. The fitted underdeck and coachroof linings consist of 6mm marine grade plywood covered in white vinyl. There is a removable lift out floor sole section giving access to the bilge area.

Heads

The moulded toilet compartment is positioned on the starboard side to the rear of forward cabin bulkhead and incorporates a moulded wash basin, moulded wall cabinet and optional shower. The compartment is fitted with an aluminium edged hinged door and internal lock. Manual sea toilet fitted with bronze through hull skin fittings, all pipe work is odour free hose. The cabin lighting is provided by a single switched fluorescent light.

< Back to main page | Next page >